top of page
Search
Best Options for Workplace EV Charging in the UK

Best Options for Workplace EV Charging in the UK

Nov 5
6 min read

A workplace charger that is always occupied, trips the supply or has no clear payment process will create more problems than it solves. The best options for workplace EV charging are not defined by charger speed alone. They depend on how long vehicles are parked, the site’s available electrical capacity, who needs access and how the installation will be managed over time.

For facilities managers, landlords and business owners, the objective is straightforward: provide a safe, reliable charging facility without compromising day-to-day operations or creating an avoidable upgrade bill. A properly surveyed and designed system gives employees, visitors or fleet drivers a practical reason to choose electric vehicles while keeping control with the business.

Start with how the car park is actually used

The first decision is not whether to install 7 kW or 22 kW units. It is understanding dwell time. An office car park where employees arrive at 8.30am and leave at 5pm has very different requirements from a depot where vans return between shifts, or a retail site where visitors stay for 45 minutes.

Long-stay locations generally benefit from standard AC charge points. They can add meaningful range during a working day without placing unnecessary demand on the incoming supply. This often allows more bays to be equipped within a sensible budget.

Short-stay, customer-facing sites may need faster charging, but only where there is a commercial or operational case. Faster is not automatically better. A high-powered charger can require substantial electrical infrastructure, including distribution upgrades, new cabling routes, groundworks and potentially discussions with the network operator. If vehicles are parked for several hours, that investment may not be justified.

A site survey should also establish the location of the supply, spare capacity in existing distribution equipment, cable routes, car park layout, lighting, drainage, protection from vehicle impact and future expansion plans. Retrofitting a charger into the nearest available space can be expensive if the route back to the electrical intake is difficult or disruptive.

Best options for workplace EV charging

Most commercial sites choose from four broad approaches. The right choice may be one solution or a phased combination as demand grows.

Shared 7 kW AC charging

A 7 kW AC charge point is the practical starting point for many offices, industrial premises and mixed-use commercial sites. It suits employee parking, pool cars and fleet vehicles that remain on site for several hours. In most cases, it provides a useful daily charge without requiring the supply capacity associated with rapid charging.

Shared units are particularly effective when paired with a management platform. Staff can authenticate through an app, RFID card or other approved method, while the business can set access rules and see charging activity. This removes the uncertainty around who is using electricity, for how long and at whose cost.

The limitation is clear: it is not designed for rapid turnarounds. A driver who arrives with a nearly flat battery and needs to leave within an hour will not get the same benefit as they would from a higher-powered system. For workplaces with predictable, all-day parking, however, 7 kW charging is often the most cost-effective option.

22 kW AC charging

A 22 kW AC charger can be useful where cars are parked for shorter periods or where the organisation wants a higher level of flexibility. It is commonly considered for visitor parking, business parks, depots and sites with staff working varied shifts.

However, the vehicle itself must be capable of accepting 22 kW AC charging to achieve the full rate. Many electric cars charge at lower AC rates, so specifying 22 kW hardware does not guarantee every user will receive 22 kW. The electrical supply also needs to support it, particularly where several units may operate at once.

This option works best where a load assessment confirms suitable capacity and the expected vehicle mix justifies the extra cost. It can also be a sensible future-proofing measure for a limited number of priority bays, rather than an across-the-board specification for every space.

Rapid DC charging for fleets and short stays

DC rapid chargers are built for speed. They can be appropriate for operational fleets, trade vehicles, customer-facing destinations and sites where drivers need to continue their journey quickly. They are not usually the first choice for a standard staff car park.

The trade-off is capital cost and infrastructure demand. Rapid charging equipment is more expensive, installation requirements are more substantial, and the impact on the site electrical network must be assessed carefully. Depending on the required power and existing supply, a new substation, upgraded connection or other reinforcement work may be needed.

For a fleet depot, this investment can be justified by utilisation. If vehicles need to complete multiple routes or return to service quickly, charging speed has direct operational value. For an office with cars parked all day, it is more likely to be over-specified.

Load-managed charging for growing demand

Load management is often the difference between a workable workplace scheme and a costly supply upgrade. Rather than allowing every charger to draw its maximum output at the same time, the system monitors available capacity and distributes power across connected vehicles.

This is especially valuable where the site already has significant electrical loads, such as plant, catering equipment, manufacturing machinery or air conditioning. Charging can be reduced at peak demand and increased when building consumption falls. Drivers still receive charge, but the site avoids exceeding agreed capacity or putting pressure on critical operations.

Smart load management also makes phased installation more realistic. Ducting, containment and distribution can be designed for future bays while only a smaller number of charge points are commissioned initially. That approach avoids repeated groundworks and gives the business a controlled route to scale.

Decide who can charge and who pays

Access arrangements should be agreed before equipment is selected. Employee-only charging, visitor charging and fleet charging each need different controls. A system with no user management may seem simple, but it can lead to disputes over availability and electricity use.

For employee schemes, an RFID card or app-based login can identify individual sessions and support fair-use policies. The business may choose to provide charging as a staff benefit, recover the electricity cost, or set different tariffs for employees and visitors. Fleet systems may need reporting by vehicle, driver, department or cost centre.

It is also worth setting practical rules from the outset. These may include maximum charging periods, requirements to move vehicles once charging is complete, priority access for fleet vehicles and procedures for visitors. Clear bay markings and signage help prevent chargers becoming ordinary parking spaces.

Commercial charge points should offer reliable back-office management, but features should match the site’s needs. A complex platform is not useful if nobody has responsibility for reviewing alerts, user access and usage reports. Equally, a basic unit without the required controls can make billing and enforcement difficult later.

Compliance, design and installation cannot be treated as an afterthought

Workplace EV charging is electrical infrastructure, not simply a car park amenity. Installation needs to account for earthing arrangements, protective devices, cable sizing, isolation, surge protection where required, suitable mounting locations and protection against vehicle impact. The equipment and installation must be appropriate for the environment, including outdoor exposure and public access where relevant.

A competent contractor will assess the existing installation, confirm whether the incoming supply can support the proposed load and provide the correct certification following completion. For commercial sites, documentation matters as much as the physical installation. It supports compliance records, insurance requirements, landlord obligations and future maintenance.

Where charging is installed alongside solar generation or battery storage, the design should consider how these systems interact. Solar can offset some daytime charging demand, but output varies with season and weather. It should be part of a realistic load strategy, not an assumption that removes the need for capacity planning.

Ongoing maintenance also deserves attention. Charge points are exposed to frequent use, weather, impact risks and software changes. A planned inspection and maintenance arrangement can identify damage, test safety functions, review connectivity and minimise the chance of an unavailable charger becoming a recurring complaint.

Build for the next stage, not just the first bays

Many businesses begin with two or four chargers, then find demand grows faster than expected. The most economical time to plan future capacity is during the initial project. Installing spare ducting, allowing room in distribution equipment and choosing a management system that can accommodate additional units may cost more at the start, but it reduces disruption and expense later.

That does not mean installing the maximum number of chargers immediately. A phased programme is often the sensible answer. Start with usage data, review how often units are occupied and then expand where demand is proven. This protects capital while ensuring staff and fleet requirements are not ignored.

For Sheffield businesses and multi-site organisations across the UK, M Howe Electrical Services can assess existing electrical capacity, design a compliant charging solution and complete installation with clear documentation. The focus should be a system that works reliably on the busiest day, not a specification that looks impressive on paper.

The most useful next step is a site survey with honest answers about parking patterns, supply capacity and future plans. Get those three points right, and workplace charging becomes a managed business asset rather than another operational issue to chase.

 
 
 

Comments


bottom of page